How to disassemble Samsung Galaxy Tab GT-P1000

Samsung P1000 Disassembly

The Samsung Galaxy Tab GT-P1000, although a classic device, may require disassembly for repair or maintenance purposes. This step-by-step guide will walk you through the process of safely disassembling the Galaxy Tab GT-P1000. Keep in mind that disassembling your device may void its warranty, so proceed at your own risk.

Samsung P1000 Disassembly
How to disassemble Samsung Galaxy Tab GT-P1000

Disassembling the Samsung Galaxy Tab GT-P1000: A Step-by-Step Guide

Tools Required

Disassembly/Repair of the mobile device Samsung Galaxy tab gt-p1000 with each step description and the required set of tools.
  1. Plastic prying tool or guitar pick
  2. Phillips screwdriver (size PH00)
  3. Heat gun or hairdryer (optional)
  4. Suction cup (optional)
  5. Tweezers
  6. Opening picks

I'll describe how to disassemble a Samsung Galaxy ab gt-p1000 in this post. I'll take off the motherboard, back cover, battery, center frame, rear camera, and front camera. If you follow the instructions, you can fix your Samsung Galaxy ab gt-p1000.

Power Off the Device

Ensure the Galaxy Tab GT-P1000 is powered off before starting the disassembly process to avoid any potential damage or electrical hazards.

Remove the Back Cover

Using a plastic prying tool or guitar pick, carefully insert it into the gap between the back cover and the frame of the device. Gently pry around the edges to loosen the adhesive securing the back cover. Take your time to avoid damaging the cover or the device.

Apply Heat (Optional)

If the back cover is difficult to remove, you may need to apply heat to soften the adhesive. Use a heat gun or hairdryer on a low setting to warm up the back cover evenly. Be cautious not to overheat the device.

Lift Off the Back Cover

Once the adhesive is softened or loosened, lift off the back cover carefully. Take note of any flex cables or connectors attached to the cover and disconnect them if necessary.

Remove the Screws

Locate and remove the screws securing the midframe to the main body of the device. These screws are typically located around the edges of the device. Use a Phillips screwdriver (size PH00) for this step. Keep the screws organized to avoid misplacement.

Separate the Midframe

After removing the screws, use a plastic prying tool or guitar pick to gently separate the midframe from the main body of the device. Start from one corner and work your way around the edges, releasing the clips holding it in place. Take care not to damage the delicate components inside.

Disconnect Flex Cables

Once the midframe is removed, you'll have access to the internal components of the device. Carefully disconnect any flex cables or connectors attached to the motherboard, display assembly, or other components using tweezers. Handle these connectors delicately to avoid tearing or damaging them.

Remove the Battery (Optional)

If necessary, locate and remove the screws securing the battery connector and any adhesive holding the battery in place. Lift out the battery carefully, ensuring not to puncture or bend it.

Access Other Components

With the midframe removed and the battery disconnected (if applicable), you can now access other components such as the motherboard, camera modules, charging port, and speakers for repair or replacement. Take note of the arrangement of components for reassembly.


Once you've completed your repairs or maintenance, reassemble the device by following these steps in reverse order. Ensure all connectors are properly seated, screws are tightened securely, and the back cover is reattached firmly.

whati is Samsung Galaxy Tab GT-P1000

The Samsung Galaxy Tab GT-P1000, released in 2010, was a groundbreaking device that marked Samsung's entry into the tablet market. Here are the specifications of the Galaxy Tab GT-P1000:

1. Display:

7.0-inch TFT capacitive touchscreen
Resolution: 600 x 1024 pixels
Pixel density: ~170 PPI
Multi-touch support

2. Processor:

1.0 GHz Cortex-A8 processor
PowerVR SGX540 GPU
512 MB RAM

3. Storage:

Internal storage options: 16GB, 32GB (expandable via microSD card slot up to 32GB)

4. Operating System:

Android 2.2 Froyo (upgradeable to Android 2.3 Gingerbread)

5. Camera:Rear Camera:

3.15 MP (2048x1536 pixels), autofocus
Front Camera: 1.3 MP

6. Connectivity:

Wi-Fi 802.11 b/g/n
Bluetooth 3.0
GPS with A-GPS support
3G network support (optional)
USB 2.0 (proprietary connector)

7. Battery:

Removable Li-Po 4000 mAh battery
Talk time: Up to 28 hours (2G) / Up to 20 hours (3G)
Standby time: Up to 1500 hours (2G) / Up to 1270 hours (3G)
8. Dimensions and Weight:
Dimensions: 190.1 x 120.5 x 12 mm (7.48 x 4.74 x 0.47 in)
Weight: 380 g (13.40 oz)

9. Other Features:

Accelerometer sensor for auto-rotate
Touch-sensitive controls
Adobe Flash support
MP4/DivX/Xvid/H.264 player
MP3/WAV/eAAC+/FLAC player
Document viewer/editor
Voice memo/dial
Predictive text input

10. Colors:

Black, White

The Samsung Galaxy Tab GT-P1000 was a revolutionary device at the time of its release, offering a compact yet powerful alternative to laptops and netbooks. Its specifications, though modest by today's standards, provided users with a versatile tablet experience.

  • How to disassemble Samsung Galaxy Tab GT-P1000
  • Samsung P1000 Disassembly
  • How to repair Samsung Galaxy Tab GT-P1000
  • How To Replace Your Samsung GALAXY Tab GT-P1000
  • How to disassemble Samsung Galaxy Tab GT-P1000
  • How to Repair Samsung Galaxy Tab P1000
  • Samsung P1000 Galaxy Tab Screen Take Apart Repair
  • Tablet Samsung GT-P1000 Galaxy Tab
  • How to open Samsung Galaxy Tab (GT-P1000)
  • Tablet Samsung GT-P1000 Galaxy Tab , Disassembly


Disassembling the Samsung Galaxy Tab GT-P1000 requires patience, precision, and the right tools. By following this guide carefully, you can safely access and repair various components of the device. However, if you're unsure about any step of the process, it's recommended to seek professional assistance to avoid causing further damage to your device.
Next Post Previous Post
No Comment
Add Comment
comment url