Samsung A10s (A107F) FRP bypass By Sp Flash Tool

 ⚠️ (Important Disclaimer)

WARNING: This guide is intended for educational purposes only and for personal use by owners who have forgotten their own Google Account credentials. Bypassing security on a device you do not legally own is strictly prohibited. We are not responsible for any permanent damage to your device (brick) or loss of data that may occur during this process. Proceed at your own risk!

📱 Samsung A10s (A107F) FRP Bypass via SP Flash Tool: 2025 Guide

The Samsung Galaxy A10s (SM-A107F) is a very popular device, but it often gets stuck on the "Google Account Verification" screen after a factory reset. Since this device runs on a MediaTek chipset, we can use the SP Flash Tool to reset the FRP partition directly.

Samsung A10S (SM-A107F) FRP android 11

This method is faster and more reliable than many "easy" APK bypass methods that no longer work in 2025.

🛠️ Requirements & Downloads

Before we begin, ensure you have the following ready on your PC:

• MTK USB Drivers: Essential for the PC to recognize your A10s in BROM mode.

• SP Flash Tool (Latest Version): The main software to flash the partition.

• Samsung A10s Scatter File: Specific for the A107F model.

• LibUSB / MTK Auth Bypass Tool: Necessary to disable the security protection before flashing.

⚡ The "Magic" Hex Addresses for A10s

To remove the Google lock, you need to format a specific part of the memory. In the Format Tab of SP Flash Tool, select Manual Format Flash and enter these values:

• Physical Start Address: 0x15d00000

• Format Length: 0x100000

📝 Step-by-Step Instructions

Step 1: Disable Auth Protection

Open your MTK Auth Bypass Tool and click on "Disable Auth." Connect your Samsung A10s to the PC while holding the Volume Up + Volume Down buttons (or using the Test Point if needed) to put it in BROM Mode.

Step 2: Configure SP Flash Tool

1. Open SP Flash Tool.

2. In the Download tab, load the Scatter-loading file you downloaded for the A107F.

3. Go to the Format tab and choose Manual Format Flash.

4. Enter the Start Address and Format Length provided above.

Step 3: Execution

1. Ensure the device is still connected and the Auth is bypassed.

2. Click the Start button in SP Flash Tool.

3. A green checkmark (Success) will appear in seconds. Your Google lock is now gone!

⚠️ Important Note on Security

If you encounter a "Too Many Failed Attempts" error while trying to sign in after the bypass, it means Google’s server is still tracking your IP or device ID. You may need to wait or follow our specialized guide here:

Read More: How to Fix Too Many Failed Attempts on Google Account Recovery

🎥 Video Tutorial (Visual Guide)

For a more detailed look at the Test Point location and the flashing process, watch my full video tutorial:

🔑 SEO Keywords

• Samsung A10s FRP Bypass SP Flash Tool

• SM-A107F Google account unlock 2025

• Samsung A10s scatter file download

• Bypass FRP Samsung A10s without box

• MediaTek FRP reset hex address A10s