How to Disassemble tablet Samsung Tab A6 SM-T585 - 10.1

igadil
22 May, 2024

samsung tab a6 sm-t285 disassembly

Greetings to you, dear followers and followers of the Advanced Settings website, today we have a new lesson in which we will discuss how to disassemble a Samsung galaxy Tab A6 10.1 inch SM-T285 tablet, . We will discuss all the stages that we must follow to disassemble our Samsung tablet device in a professional and organized manner without causing any harm to the tablet screen. Follow with me, our dear viewers, the steps and points.

Samsung Galaxy Tab A6 disassembly
Samsung Galaxy Tab A6 disassembly

The important thing is, and you will find everything in the video below, as well as in the written lesson. Do not go far, follow along with us.

How to disassemble Samsung tab A 10.1 SM-T285 teardown

Disassembling a Samsung Tab A6 SM-T285 can be a meticulous task, but it is necessary for various reasons, such as repairing, upgrading, or replacing internal components. This guide will walk you through the entire disassembly process, providing detailed instructions, images, and a video tutorial to ensure you can follow along easily. By the end of this article, you will have a thorough understanding of how to safely disassemble your tablet.

Before you start

Examine the model number on the back of your Samsung phone to confirm that it is the correct model before you begin.

Using tape or Patafix, adhere the paper assembly help template that comes with your order to the desired location for the screws and small components. If you got the magnetic pattern or the ready-to-repair kit, proceed with the iStick (adhesive assembly aid pattern) in the same manner. While an inverted screw can cause irreversible damage to your phone, a misplaced screw might not jeopardize the repair. Exercise extreme caution.

Next, set up your repair area so that you can comfortably view the computer, tablet, or other device that will help you follow the tutorial.
Is it possible to get rid of fingerprints using a lint-free microfiber cloth? Utilize the opportunity to unlock your phone and use a blower or can of air to remove any accumulated dust.

Lastly, get ready all the tools listed at the beginning of the page that are required for the repair.

Tools Needed

Before we begin, gather the following tools:
  • Small Phillips head screwdriver
  • Plastic opening tool or spudger
  • Tweezers
  • Suction cup
  • Anti-static wrist strap (optional but recommended)

Safety Precautions

  1. Power Off: Ensure the tablet is completely powered off before starting the disassembly.
  2. Work Area: Set up a clean, well-lit work area.
  3. Static Electricity: Use an anti-static wrist strap to prevent static electricity from damaging the components.

Step-by-Step Disassembly Process

Remove the Back Cover

  1. Heat the Edges: Use a heat gun or hairdryer to slightly warm the edges of the tablet to soften the adhesive.
  2. Suction Cup and Spudger: Place a suction cup on the back cover and gently lift to create a gap. Insert the plastic opening tool or spudger into the gap.
  3. Pry Open: Carefully work your way around the tablet, prying open the back cover. Take your time to avoid damaging the clips and connectors.

Disconnect the Battery

  1. Locate the Battery Connector: Once the back cover is removed, locate the battery connector on the motherboard.
  2. Disconnect: Use the plastic spudger to carefully disconnect the battery from the motherboard.

Remove Internal Components

  1. Unscrew the Motherboard: Use the Phillips head screwdriver to remove the screws securing the motherboard.
  2. Disconnect Cables: Gently disconnect all the ribbon cables connected to the motherboard using tweezers or the spudger.
  3. Remove the Motherboard: Lift the motherboard out of the tablet case carefully.

Remove the Battery

  1. Release Adhesive: Use the spudger to gently release the adhesive holding the battery in place.
  2. Lift the Battery: Carefully lift and remove the battery from the tablet.

Remove Additional Components

  1. Camera Modules: Disconnect and remove the front and rear camera modules.
  2. Speakers and Antennas: Unscrew and remove any remaining components such as speakers and antennas.

Reassembly Instructions

To reassemble your Samsung Tab A6 SM-T285, follow the disassembly steps in reverse order. Ensure all connectors are securely reattached, and the components are properly seated.


Disassembling the Samsung galaxy Tab A6 SM-T285 requires careful attention to detail and the right tools. By following this guide, you can successfully disassemble your tablet to perform repairs or upgrades. Always remember to work in a static-free environment and handle all components with care.

By taking your time and following each step carefully, you can avoid damaging your tablet and ensure a successful disassembly and reassembly process. If you encounter any difficulties or are unsure about any step, refer to the visual aids provided or seek professional assistance.

Conclusion

We hope this comprehensive guide has been helpful in disassembling your Samsung Tab A6 SM-T285. If you found this article useful, please share it with others who might benefit from it. For more tutorials and tech guides, stay tuned to our blog.

Remember to adjust the links for the images and the video tutorial to point to the appropriate resources you have available. This will ensure your readers have all the visual aids they need to complete the disassembly successfully.
Next Post Previous Post
No Comment
Add Comment
comment url