Infinix Smart 8 (X6525) Open the Back cover

igadil
3 Jun, 2025

A stylish and reasonably priced smartphone, the Infinix Smart 8 (X6525) provides great value for the money. You must carefully disassemble the device and remove the back panel before you may replace the battery, replace the screen, or make other repairs.

infinix Smart 8 disassembly Phone screen repair

The Infinix Smart 8 (X6525) smartphone disassembly is the main topic of this lesson, which offers a thorough and methodical approach for people who are either seasoned phone repair professionals or inquisitive and cautious beginners.

The tutorial starts off with a focus on safety and warranty issues, advising customers to continue only if they are comfortable and have the necessary equipment, including a Phillips screwdriver, plastic pry tool, and an optional suction cup.

The first step emphasizes how crucial it is to turn the gadget off entirely in order to prevent electrical damage. In order to avoid damaging the device's internal components during panel removal, the user is then instructed to remove the SIM card tray using a conventional ejector tool.

infinix smart 8 open back cover
infinix smart 8 Open Back Panel How to open back panel

We'll show you how to open the Infinix Smart 8's back panel and perform basic disassembly in this article, all without causing any damage to your phone.

Important Disclaimer

Note: Your phone's warranty may be voided if you disassemble it.  Proceed only if you have the necessary resources and are confident.  It's best to speak with a qualified technician if you have any questions.

After that, the tutorial moves on to the main step, which is taking out the back panel that is attached to the frame using clips. To remove the clips without breaking the panel, the user is told to carefully work their way around the phone's edges with a plastic pry tool. Given the brittleness of plastic clips and the possibility of interior damage, this section stresses patience and prudence.


To gain access to the motherboard, battery, and other important components, the article describes how to unscrew and raise the mid-frame after removing the back panel. Every internal part, including the camera modules, charging port flex cable, fingerprint sensor, and non-removable battery, is briefly explained, along with its locations and functions.

Articles related to this topic:

How to disassemble Samsung Galaxy A32 SM-A325

🔧 Tools You’ll Need

Before starting, make sure you have the following tools:

  • Plastic Pry Tool / Guitar Pick
  • Suction Cup (optional but helpful)
  • SIM Tray Ejector Tool
  • Small Phillips Screwdriver (#000)
  • Anti-static Gloves (recommended)
  • Tweezers (optional for handling connectors)

Power Off the Device

Before doing anything else, power off your Infinix Smart 8 completely to prevent short circuits or damage to the internal components during the disassembly process.

Remove the SIM Card Tray

The SIM and SD card tray can be ejected and removed with a thin paperclip or a SIM tray ejector tool. This is a crucial step because if you try to remove the back panel without ejecting the tray, it can get damaged.

Pry Open the Back Panel

The back cover of the Infinix Smart 8 (X6525) is made of plastic and is attached to the frame with a clip. Take these actions:
  • Locate the small gap between the back panel and the mid-frame. Usually, this is near the SIM tray slot or charging port.
  • Insert a plastic pry tool into the gap and gently work your way around the edges. Do not use metal tools as they may damage the casing.
  • Slide the tool slowly around the perimeter. You'll hear light "clicks" as the clips disengage.
  • If needed, use a suction cup on the back panel to gently lift and loosen it.
  • Continue prying until the back panel is completely free.
Advice: Have patience. Internal clips may break or the plastic may split if the back cover is forced.

Unscrew and Remove the Mid-Frame (Optional)

You might see an inner plastic mid-frame protecting the motherboard and battery after removing the rear panel.
  1. Use a small Phillips screwdriver to remove all visible screws.
  2. Gently lift the mid-frame using a plastic pry tool. Avoid putting pressure near the camera modules or fingerprint sensor (if present).
  3. Once removed, you’ll have access to the internal components like the battery, motherboard, and camera modules.

Identify Internal Components (For Repairs)

After removing the back and mid-frame, you can access:
  • Battery (non-removable type but replaceable with heat and care)
  • Motherboard
  • Charging port flex cable
  • Rear and front cameras
  • Fingerprint sensor ribbon (if applicable)
You can now proceed with further repairs or replacements as needed.

📦 Reassembling the Phone

When you're done with your repairs or inspection:
  • Place the mid-frame back carefully and screw it into place.
  • Snap the back panel back onto the device by pressing gently along the edges.
  • Re-insert the SIM and SD card tray.
  • Power on the device to test.
Reassembly instructions are also included in the lesson to make sure users put every component back together in the correct order. Before completely sealing the item, it is advised to test it to ensure that any repairs were successful.

Best habits, such organizing screws and avoiding violent activities, are repeated throughout the session. Additionally, it recommends adding diagrams, detailed pictures, or even a repair video to improve the learning process.

The user should know exactly how to safely open and reassemble their Infinix Smart 8 for cleaning, repair, or replacement at the end of the guide. The lesson's general tone is one of teaching, caution, and support, with the goal of equipping users with both knowledge and doable actions.

✅conclusion

It is possible to disassemble the Infinix Smart 8 (X6525) with the correct tools and a steady hand. Opening the rear panel is an essential initial step whether you're repairing the screen, changing the battery, or checking internal parts.

Keep your screws tidy, work slowly, and take your time. It's preferable to contact an authorized repair location or speak with a professional expert if you're ever unsure.
Next Post Previous Post
No Comment
Add Comment
comment url