xiaomi redmi a3 reset recovery no command
Introduction
If your **Xiaomi Redmi A3** is stuck on the **“No Command”** screen or you need to perform a **factory reset**, don’t worry this is a common situation with Xiaomi devices.Normally, a factory reset can be done in two ways:
- From the **Settings menu**, or
- Using the **hardware buttons** (known as a Hard Reset).
How to Exit “No Command” Screen on Xiaomi Redmi A3 | Factory Reset via Recovery Mode
Important Warning Before You Reset
Before performing the factory reset, make sure you **know your Google account email and password** that were previously linked to the device.
 |
How to Exit No Command Screen on Xiaomi Redmi A3 |
After the reset, **Factory Reset Protection (FRP)** may ask for these credentials to verify ownership.
If you don’t remember your Google login, you could be locked out of the phone after resetting.
✅ So, always confirm your Google account information before proceeding.
Before You Begin
Please note:- 🔋 Charge your phone to at least **50%**.
- 💾 **All personal data will be erased** (photos, contacts, apps, messages).
- ☁️ Remove your Google account if possible, to avoid FRP verification later.
How to Access the Recovery Mode and Exit “No Command” Screen on Redmi A3
Follow these exact steps carefully:- **Power off** your Redmi A3 completely.
- **Press and hold** the **Volume Up** button and the **Power** button simultaneously.
- When you see the **“No Command”** screen with the Android logo lying down, don’t panic — this is normal.
- Now, **press the Volume Up and Power buttons once together** (a single short press).
- This action will bring up the **Recovery Mode** menu.
- In Recovery Mode, use the **volume buttons** to navigate and highlight **“Wipe data / Factory reset.”**
- Confirm your selection using the **Power button**.
- Choose **“Factory data reset”** to confirm again.
- Wait until the process finishes, then select **“Reboot system now.”**
- Your Xiaomi Redmi A3 will now restart and return to its factory default settings fresh, fast, and ready for setup.
After the Reset
Once the device restarts:- Set up your **language**, **Wi-Fi**, and **Google account**.
- If FRP protection is enabled, you will be asked to verify your previous Google account.
- The phone should now operate smoothly, without lag or software issues.
Why Does “No Command” Appear?
The *No Command* screen usually appears when the system is preparing to open **Android Recovery Mode**.
 |
How to Access and Exit the No Command Mode on Xiaomi |
It’s not an error it simply requires the user to press a specific key combination (Volume Up + Power once) to continue.
This extra step is part of Android’s security design to prevent accidental access to the recovery tools.
read also
realme narzo 20 Factory reset | Forgotten Password
How to hard reset factory itel A70
lg k100 | k100e | k3 | hard reset
Samsung A03 core Reset factory
samsung J2 Core | hard Reset | SM- j260f formating
Conclusion
Performing a **hard reset on the Xiaomi Redmi A3** is an easy and effective solution when your phone is frozen, locked, or stuck on the *No Command* screen.
Just remember to press **Volume Up + Power once** when the *No Command* screen appears that’s the key to accessing the recovery options.
 |
How to Exit No Command Screen on Redmi A3 |
Always back up your data and confirm your Google account credentials before resetting your device.
⚠️ Disclaimer
This guide is provided **for educational and technical purposes only**.
We are **not responsible** for any misuse or data loss resulting from following these steps.
Use this method only to restore or repair your own Xiaomi Redmi A3.
