xiaomi redmi 8 FRP lock (Test Point with Best Flash Tool V1.7)
Introduction
Bypassing the Factory Reset Protection (FRP) on the Xiaomi Redmi 8, especially on devices running recent security patches, often renders standard software or non-invasive methods ineffective.
 |
| Redmi Note 8 Test Point (Qualcomm 9008) FRP bypass |
This guide provides a detailed, technician-level procedure focusing on the successful use of the free Best Flash Tool by Boss V1.7. This process requires entering the device's EDL Mode (Emergency Download Mode) through the Test Point method, which involves careful hardware intervention.
🚨 Critical Legal and Technical Disclaimer
This procedure is highly technical and requires physical disassembly of the device. It should only be performed by experienced mobile technicians.
Xiaomi Redmi 8 FRP Free Method by Best Flash Tool V1.7 and Test Point
We are not liable for any device damage resulting from improper handling, poor soldering, or unauthorized modifications.
- Data Integrity: Although focused on the lock, any major intervention carries risk. Ensure you understand the consequences.
- Legal Compliance: This guide is intended solely for the legal owner of the device who has lost access due to a forgotten Google Account password following a legitimate factory reset. Do not use this method on stolen or unauthorized devices.
Section 1: Prerequisites and Required Tools
Before starting the bypass process, ensure you have the following software and hardware components ready.
Hardware Requirements
- Xiaomi Redmi 8 (locked device).
- A disassembled phone (back cover removed) to access the Test Point.
- Fine Tweezers or a specialized conductor wire for bridging the Test Point.
- A reliable USB Cable.
Software Requirements
- Best Flash Tool by Boss V1.7: The specific version required for successful communication with the device's chipset.
- Qualcomm/MTK USB Drivers: Ensure the correct drivers are installed to recognize the device in EDL/Test Point mode.
- A Windows PC: Running Windows 7 or higher.
📥 Section 2: Download and Setup the Best Flash Tool V1.7
To proceed with the FRP bypass, you must first download the specific version of the tool used in this tutorial and configure it correctly.
👇👇👇
- Tool Download: Download the Best Flash Tool by Boss V1.7 from a trusted source. [link here].
- Extraction: Extract the downloaded ZIP file to a known location on your desktop (e.g., C:\FRP_Tools\BestFlash).
- Security Warning: Temporarily disable your antivirus or Windows Defender before extracting and running the tool, as many flashing tools are often flagged as false positives. Remember to re-enable security software immediately after the process is complete.
- Driver Installation: Ensure your Qualcomm/MTK drivers are fully installed and updated before connecting the phone.
Section 3: Locating and Accessing the Test Point (EDL Mode)
The Test Point method forces the device into a low-level communication mode (EDL) that bypasses the locked Android bootloader.
 |
| Redmi 8 test point |
- Power Off: Ensure the Xiaomi Redmi 8 is completely powered off and disconnected from the PC.
- Disassembly: Carefully remove the back cover and locate the motherboard.
- Test Point Identification: Locate the two specific gold pins on the motherboard that serve as the Test Point for this model. [Note to Technician: Reference the visual diagram/video for the exact location, typically near the battery connector or under a shielding sticker.]
- Bridging the Pins: Using the tweezers, gently and firmly connect the two Test Point pins together.
Section 4: The FRP Bypass Procedure with Best Flash Tool
This section details the software side of the operation once the device is successfully in EDL Mode.- Launch the Tool: Run the Best Flash Tool by Boss V1.7 executable file with Administrator privileges.
- Connect in EDL: While the Test Point pins are bridged, connect the USB cable to the PC. The system should emit a sound indicating a new hardware connection.
- Verify Connection: Check your PC’s Device Manager. The device should be recognized under Ports (COM & LPT) as Qualcomm HS-USB QDLoader 9008. If it fails to show 9008, the Test Point connection or drivers are faulty.
- Select Model/Chipset: In the Best Flash Tool interface:
- Select the correct manufacturer (Xiaomi).
- Select the model (Redmi 8).
- Ensure the tool detects the active COM Port (the one assigned to QDLoader 9008).
- Execute FRP Bypass: Navigate to the FRP tab or the dedicated reset function within the tool.
- Confirm Operation: Click the Start or Erase FRP button. The tool will execute the necessary scripts, usually completing the process within seconds. Look for a "Success" or "Done" message in the tool's log window.
- Disconnect and Reboot: Safely disconnect the tablet and unbridge the Test Point pins. Press and hold the Power Button for several seconds to force a normal boot.
Troubleshooting and Final Checks
- Driver Failure (No 9008): If the device is not recognized, reinstall the Qualcomm drivers or try a different USB port/cable. link
- Tool Error: If the tool fails to execute the command, verify that the firewall/antivirus is temporarily disabled and that you are using the correct Test Point.
- Post-Bypass: The device will boot to the initial setup screen. Proceed to set up the device. If the bypass was successful, you will be able to skip the Google Account login prompt.
📺 Visual Aid (Video)
For a practical demonstration of the disassembly, Test Point location, and synchronization with the Best Flash Tool, please refer to our instructional video.
also read
- samsung a20s FRP lock with BFT tool by test point
- samsung galaxy A22 frp by unlock tool legally
- samsung galaxy a05 frp by unlock tool Legally
- xiaomi redmi note 8 reset and google account lock legally
Final Note
This highly customized method demonstrates a deep technical understanding of the device's hardware and software protocols.
 |
| Redmi 8 olive Reset FRP Test Point By BEST FLASH TOOL V1.7 |
Remember to always prioritize customer data privacy and adherence to all legal frameworks.
