Huawei Kirin USB COM 1.0 Driver Download Fix FRP & Huawei ID
CRITICAL SAFETY WARNING
Proceed with Caution: Accessing the deep repair mode for Kirin processors requires using a Test Point (shorting two points on the motherboard). This process involves opening the phone and carries a risk of hardware damage. Advanced Setting is not responsible for any damage. Always use professional tweezers and follow the schematics carefully.
Huawei Kirin (HiSilicon) Driver Guide 2026: Mastering Huawei USB COM 1.0
Introduction: The Unique Architecture of Kirin Processors
HiSilicon Kirin processors power the majority of Huawei and Honor smartphones. Unlike other chipsets, Huawei devices have a very specific security layer.
 |
| Huawei Kirin USB COM 1.0 Driver Download 2026: Fix FRP |
When a Huawei phone is "bricked" or locked with a Huawei ID, the only way to repair it is through a specialized connection mode known as USB COM 1.0.
What is Huawei USB COM 1.0 Mode?
This is the lowest level of communication with a Kirin processor. It is triggered by a "Test Point" while connecting the USB cable. In this mode, professional tools like SigmaKey, Chimera, or TFT Unlock can bypass security and write factory firmware to revive the device or remove permanent locks.
The Essential Driver: Huawei HiSuite and COM 1.0
To make your PC recognize a Kirin device, you need more than just a standard USB driver. You need the Huawei USB COM 1.0 Driver specifically designed for these emergency repairs.
Key Benefits of These Drivers:
Deep System Access: Required for removing Huawei ID and FRP on Kirin 710, 810, 980, and 990.
Compatibility: Supports all Windows versions including Windows 11.
Tool Support: Essential for all major GSM repair dongles and boxes.
Download and Resources Section
1. Huawei USB COM 1.0 Driver (Latest 2026 Update) The primary driver needed for your computer to detect Kirin devices during a Test Point operation. Download Link:
Huawei USB COM 1.0 Driver within (huawei pc manager)
2. Huawei HiSuite Official Setup It is recommended to install the official HiSuite as it contains the base ADB and Fastboot drivers for Huawei. Download Link:
"If you are looking for the latest Kirin (HiSilicon) Drivers, the easiest and safest way is to install the official Huawei HiSuite. It automatically configures your PC to recognize all Huawei devices, including those in Test Point mode, ensuring a stable connection for firmware flashing and FRP bypass."
Driver Tools 1.2.0.5 Driver | HUAWEI Official Site
How to Verify the Kirin Connection (Step-by-Step)
Open Device Manager on your Windows PC.
Disassemble the phone and locate the Test Point for your specific Kirin model.
Short the Test Point to the ground (metal shield) and plug in the USB cable.
Check the "Ports (COM & LPT)" section.
You should see: Huawei USB COM 1.0 (COMxx).
Note: If you see "USB Ser" or an exclamation mark, you must update the driver manually using the files above.
 |
| Huawei Kirin USB COM 1.0 Driver Download Fix FRP & Huawei ID |
SEO and AdSense Optimization for Advanced Setting
This article targets "High-Intent" users—professional technicians who are ready to take action. Keywords like "Huawei ID Remove" and "Kirin Test Point" are highly valuable. By providing these solutions on Advanced Setting, you will see a significant boost in your AdSense revenue through premium Ad Intents.
