samsung galaxy s24 ultra (china version) reset factory setting

igadil

31 Oct, 2025

Samsung Galaxy S24 Ultra China Version (SM-S9280) is one of the most advanced Samsung devices, but even premium smartphones may experience software glitches, freezing, forgotten passwords, or system lag.

galaxy s24 ultra china version hard reset

How to hard reset Samsung Galaxy S24 S24+ S24 Ultra

When these issues occur, performing a factory reset or a hard reset using hardware buttons can help restore the device to its original state and fix most software problems.

Hard Reset Samsung Galaxy S24 Ultra (China Version) Complete Factory Reset Guide

This guide focuses exclusively on the China Variant, which often behaves differently due to its unique firmware and the absence of pre-installed Google services.

✅ Important FRP Warning Before Resetting

Before performing any factory reset, ensure you know the Google account (Gmail) and password or the Samsung account previously added to the device.

Samsung devices including the China Version activate FRP (Factory Reset Protection), which will require the same account after the reset.

If you don’t remember it, the device may remain locked after reboot.

✅ Important Notes Before Resetting

Charge your device to at least 50%.
Back up important data (photos, contacts, videos, documents).
Remove all accounts (Google, Samsung) if the phone is still accessible.
The steps below apply only to the China version SM-S9280, which may differ from global models.

Method 1: Hard Reset Samsung S24 Ultra (China Version) via Hardware Buttons

This is the ideal method when the phone is locked, frozen, or you cannot access settings.

How to Hard Reset Samsung Galaxy S24 Ultra Without PC

Turn Off the Phone

If frozen, press and hold Power + Volume Down until the device powers off.

Enter Recovery Mode

Press and hold Volume Up + Power at the same time.
Release both buttons once the Samsung logo appears.
Wait for the Android Recovery Mode screen.

✅ If You See “No Command”

Some China variants display a No Command screen before recovery.
To exit it:

Press Power + Volume Up once together

This will open the recovery menu.

Perform the Hard Reset

In the Recovery menu:

Use Volume buttons to navigate.
Select Wipe data / factory reset
Press Power to confirm.
Choose Factory Data Reset
Wait until the wiping process is complete.

Reboot

Select:

Reboot system now

Your Galaxy S24 Ultra China Version will restart and return to the initial setup screen.

Method 2: Factory Reset Samsung S24 Ultra China Version Using Settings

Use this only if the phone is functioning normally.

Open Settings
Go to General Management
Tap Reset
Select Factory Data Reset
Review the information and tap Reset
Confirm with your screen lock (PIN/Pattern/Password)

The device will reboot and perform a complete wipe.

✅ Why the China Version Requires Special Attention

The Samsung S24 Ultra China Variant:

Comes without Google Mobile Services
Allows manual installation of Google apps
Often receives different firmware updates
Is more prone to certain system conflicts or app compatibility issues

Because of this, users may face:

Boot loops
Freezing issues
Google Framework errors
Instability after installing external APKs

A hard reset using hardware keys is often the safest way to restore stability.

✅ Conclusion

Performing a factory reset or hard reset on the Samsung Galaxy S24 Ultra China Version is an effective solution for fixing system problems, removing lock issues (when Google account is known), and restoring your device to peak performance.

Samsung Galaxy S24 Ultra (china) Reset via recovery mode

By following the steps above and respecting the FRP warning, you can safely reset your device without unnecessary complications.

✅ Educational Disclaimer

This guide is for educational and troubleshooting purposes only.
We are not responsible for any misuse of the information provided.

samsung galaxy s24 ultra (china version) reset factory setting